Scada | Mohamed R. Elshamy

Mohamed R. Elshamy

Mohamed R. Elshamy

This channel introduces these contents:. 1- Control Engineering. 2-Embedded Hardware Engineering . 3-Embedded Software Engineering. 4-Automation.. 5-Altium Designer courses from scratch.. 6-AI Engineering.. 7-Tiny Machine learning.. 8-Machine Learning for Embedded. 9-Applied Machine Learning. 10-Hardware Security.

تفاصيل الكورس

  • دروس الكورس20
  • مدة الكورس5س 55د
  • عدد الطلاب2
  • اللغةعربي
  • لا يحتاج متطلب سابق
  • (1)
  • ادرس الكورس مجانا

دروس الكورس

  1. 1 | LEC1 - Introduction To SCADA system محمد الشامي 00:08:44
  2. 2 | LEC2 - Introduction to PLC siemens S7-300 محمد الشامي 00:09:44
  3. 3 | LEC3 - Introduction to sematic manager 5.6 software محمد الشامي 00:12:34
  4. 4 | LEC4 - Addressing in PLC Siemens S7-300 محمد الشامي 00:15:46
  5. 5 | LEC5 - Reference data and Symbol table in sematic manager PLC محمد الشامي 00:12:25
  6. 6 | LEC6-START_STOP APPLICATION in Sematic manager with PLC s7-300 محمد الشامي 00:15:27
  7. 7 | LEC7-Part1 - Hardware Wiring of PLC S7 300 with Inputs and outputs محمد الشامي 00:21:53
  8. 8 | LEC7-Part2 - Hardware Wiring of PLC S7-300 with Inputs and outputs محمد الشامي 00:17:25
  9. 9 | LEC8-start stop application on plc s7-300 محمد الشامي 00:15:38
  10. 10 | LEC9 - Start-Stop Application using WINCC SCADA system 00:31:59
  11. 11 | LEC10 - start-stop for a DC Motor using WINCC SCADA system and PLC S7-300 00:07:57
  12. 12 | LEC11 - Buttons and loads Animations on WINCC flexible محمد الشامي 00:19:27
  13. 13 | LEC12 - Administration and authorization in WINCC Flexible 2008 محمد الشامي 00:13:16
  14. 14 | LEC13- ON Delay Timer on PLC Siemens 00:15:34
  15. 15 | LEC14 - showing the on delay timer in PLC Siemens in WINCC gragh 00:16:48
  16. 16 | LEC15 - Part1- Controlling the Speed of Induction MOTOR using WINCC Flexible, PLC s7-300, and VFD 00:24:53
  17. 17 | LEC15 - Part2- Controlling the Speed of Induction MOTOR using WINCC Flexible, PLC s7-300, and VFD 00:31:09
  18. 18 | LEC15 - Part3- Controlling the Speed of Induction MOTOR using WINCC Flexible, PLC s7-300, and VFD 00:03:22
  19. 19 | LEC19 - Showing the Analog Input in PLC s7 300 on SCADA -WINCC flexible محمد الشامي 00:34:42
  20. 20 | LEC20- PT100 temperature sensor connected with PLC S7-300 and WINCC Flexible - Practical 00:27:07
    تقييمات الطلاب

    ( 5 من 5 )

    ١ تقييمات
    5 نجوم
    100%
    4 نجوم
    0%
    3 نجوم
    0%
    نجمتين
    0%
    نجمة
    0%
    Y
    Youtube

    29-07-2024